One of the most common copier printer repair problem is related to the fuser assembly. Often questions are asked about replacing the units verses obtaining the PM kit or fuser repair parts for copiers printers.  On a small number of some model copier printers by Rich, Lanier, Gestetner, Savin, Sharp, Canon and other copeir printer scanners the user can actually replace the fuser fixing assembly.  the fuser or fixing assembly (both are the same thing) is the part that uses heat and pressure to fuse (Melt) the toner onto the paper.

The fuser contains gears, rollers, thermal control devices and heating elements. if you get a fuser error code many times it is cause by the copier printer thermistor or thermostat failure inside the fuser assembly. On most models the copier printer repair consists of replacing 2 to 3 thermal control devices. This requires complete dis-assembly of the fuser assembly which is not something most people can do on their own unless they are trained copier printer certified repair technicians. teh average time to do this task is 1 to 1.5 hours with copier repair parts ranging from $60 to $100 dollars depending upon your copier printer scanner model.

The second cause of fuser failure is worn out parts. This requires a complete copier printer fuser repair overhaul or replacement.  On some models the solutions is just to swap the fuser assembly to repair the copier printer problem which can be accomplished by a end user with limited repair skills.  However, with many copier printer scanner models by Ricoh, Canon, Toshiba, Savin, Gestetner, Lanier and other brands there is a maintenance kit design specifically to rebuild the fuser assembly. The maintenance kit requires a certified copier printer repair technicians to install and adjust. The repair takes approximately 1.5 hours with parts costs $290 to $500 depending upon your model and manufacture of the copier printer.

The copier printer maintenance kit usually contains 95% of all the wear and tear parts in the fuser assembly. Some additional parts that may be need are the fuser bushings, cleaning webs and fuser drive gears.  yes, you can purchase a whole fuser instead of the maintenance kit but be warned the whole fuser assemblies are very very expensive. The average costs of a complete fuser assembly on a mid size copier printers is usually $600 to over $1000 not including the labor to install and adjust the equipment. If your copier printer has a fuser error or paper jam at the fuser them it needs maintenance.  If you have questions please contact Advanced Business Computers or ask it on this blog for a quick response.  Copier printer parts and maintenance is important to keep your business running smoothly. Ask for a copier printer maintenance agreement service quote before you have problems to avoid expensive repairs.

Tagged with:

Filed under: Printer Copier Repair Help

Like this post? Subscribe to my RSS feed and get loads more!