Laser printers such as Lexmark, HP, Okidata and other have common problems. The Lexmark error code 92 relates to the fuser assembly.  The Lexmark printer fuser assembly is the part that uses heat and pressure to melt and fuse the toner onto the page. Depending upon the Lexmark printer model the fuser needs to be repaired replaced every 200,000 to 300,000 pages.

In order to repair the Lexmark printer you will need to first power off the laser printer to cool down the fuser. Once it’s cooled down unplug the power form the Lexmark printer.

Now open the back and remove the fuser assembly. You may need to removed cables or wires that connect the fuser to the power supply. As again before you attempt to repair the Lexmark printer disconnect the power and let the fuser cool down! The fuser is heated to 180 degrees Celsius and can cause a serious burn.

Several clients ask if they can rebuild the Lexmark printer fuser assembly. It is possible and Lexmark doe sit all the time. However, unless you replace the entire roller, Thermister, thermostat, bearings, pick finger and have good mechanical abilities we do not recommend that you repair Lexmark fuser assemblies.

If you have a specific  Lexmark printer repair service question or need additional help with your repair f the printer please contact use at Advanced Business Computers Inc.

Tagged with: • • • • • •

Filed under: Printer Copier Repair Help

Like this post? Subscribe to my RSS feed and get loads more!